FREE SHIPPING IN ANY ORDER OVER €50 ! (including pallet items)
You may also like…
-
Brake Service ToolsBrake Pressure Test Kit
BRAKE PRESSURE TEST KIT
2- 3000 PSI Gauge Assembly
1- Pressure Adapter
1- Teves Adapter
1- 45°Swivel Fitting
1- 90°Swivel Fitting
2- 7/16-24 Straight Fitting
2- 1/4-28 Straight Fitting
2- 3/8-24 Straight Fitting
2- 5/16-24 Straight Fitting
2- M10-1.5 Straight Fitting
2- M8-1.25Straight Fitting
2- M10-1.0 Bleeder Adapter
2- 7/16-20 Straight Fitting
2- M7-1.0 Straight Fitting(0 reviews)€139.00 Exc. VAT €113.01 Add to cart -
Air ToolsAir Blow Gun With Flow Regulator
Product Description
adjustable air flow
110 mm nozzle
material: aluminum alloy
air supply can be attached to handle or top of the gun
non-slip handle
includes 1/4″ air connector
max. pressure 10 bar, operating pressure 6.3 bar
noise level: 86 dB
air consumption: up to 320 l/min(0 reviews)€11.19 Exc. VAT €9.10 Add to cart -
1/2" Drive Tools10 Piece 1/2 Drive Socket Set
Product Description:
- 10pc 1/2 inch Drive Deep Socket Set
- Sizes – 13. 14. 15. 16. 17. 18. 19. 21. 22. 24mm
- Wall Drive with Socket Rail
(0 reviews)€29.00 Exc. VAT €23.58 Add to cart -
Hoists & StrapsChain Sling 2mtr 4 Legs Up To 4 Ton
Product Description:
2M / 4 Leg / 4 ton Chain Sling
CE Approved(0 reviews)€145.00 Exc. VAT €117.89 Add to cart
Related products
-
Suspension & Drivetrain ToolsBall Joint Remover Kit-5pc Fork Type
Product Description:
5pc Fork Type Ball Joint Separator
Tie Rod/ Pitman Arm Tool Kit
Tie Rod Spreader with 11/16 inch Wedge Opening
Ball Joint Separator with 15/16 inch Jaw Opening
Pitman Arm Wedge with 1.1/8 inch Opening
8 inch Handle for use with a regular hammer
Handle with 0.401 inch Shank for use with an aim impact hammer
Both handles fit all three forks
Piloted handles act as shock absorbers to protect thread handles(0 reviews)€34.00 Exc. VAT €27.64 Add to cart -
Suspension & Drivetrain ToolsWishbone Extractor Tool
Professional tool for commercial or occasional use
The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing.
After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
PROBLEMS THAT OCCUR HERE
The joint wedges again in the cone after it was pressed down only briefly with a tyre lever
The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away.
With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use).
SPECIFICATIONS: Material: CR-MO steel w/steel tube
Total length 1180mm
Comfortable rubber grip
Adjustable canter lever hook
Sliding adjustment for easy positioning
SINGLE PERSON OPERATION
Maximum leverage(0 reviews)€63.09 Exc. VAT €51.29 Add to cart -
Suspension & Drivetrain ToolsTrident Oetiker Cv Drive Shaft Boot Clamp Pliers
These pliers are designed to fit the Oetiker CV Drive Shaft boot Securing clips. They have a plate that presses a flat on the top of the clip so that it forms the spring loop correctly.
The Handles have 1/2 Sq section holes in the handle shafts to enable a torque Wrench to be used with the tool when required.(0 reviews)€19.00 Exc. VAT €15.45 Add to cart -
Suspension & Drivetrain ToolsInstaller Tool Mondeo Subframe Bus Remover
Product Description:
Rear Sub Frame Bush Kit for Ford Mondeo(0 reviews)€39.00 Exc. VAT €31.71 Add to cart