Additional information
Weight | 1 kg |
---|
From our Customers according to Google Reviews “Always great to deal”
Drop forged CR-V steel jaws& leaded screws(370mm)both heat treated ensure you obtain professional job performance.
The tool is designed for use in limited space under wheel arch.
Jaws design is fitting to wrap coil claws for safely.
Maximum jaw opening is 370mm.
€24.00 Exc. VAT €19.51
In StockWeight | 1 kg |
---|
23mm applicable: AUDI, BMW, Citroen, Ford, Mercedes, Opel, VW, VOLVO 28mm applicable: Audi (A4, A6, A8), VW (Passat), Mercedes (W203) 34mm applicable: VW (from 98), Mercedes
Product Description:
5pc Fork Type Ball Joint Separator
Tie Rod/ Pitman Arm Tool Kit
Tie Rod Spreader with 11/16 inch Wedge Opening
Ball Joint Separator with 15/16 inch Jaw Opening
Pitman Arm Wedge with 1.1/8 inch Opening
8 inch Handle for use with a regular hammer
Handle with 0.401 inch Shank for use with an aim impact hammer
Both handles fit all three forks
Piloted handles act as shock absorbers to protect thread handles
Remove/install rear sub-frame bushes on Ford Focus.
Can be used in situ – no need to remove sub-frame from vehicle.
Application: Ford; Focus MK1 1998-2004.
Heavy-duty ball joint splitter suitable for commercial vehicles
Designed to be operated manually or by 12 Ton hydraulic ram supplied. Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram
Allows one-person adjusting
Reduces the required time
Pressure width 135 to 175 mm
22 mm 6-edge spindle
3 spindle lengths for a wide range of applications:
75 mm for Seat Toledo – VW Jetta, Golf, etc.
85 mm for Seat Cordoba – VW Polo 95>
115 mm for Chrysler Voyager, etc.
Product Description:
Rear Sub Frame Bush Kit for Ford Mondeo
These pliers are designed to fit the Oetiker CV Drive Shaft boot Securing clips. They have a plate that presses a flat on the top of the clip so that it forms the spring loop correctly.
The Handles have 1/2 Sq section holes in the handle shafts to enable a torque Wrench to be used with the tool when required.
facilitates assembly and disassembly
suitable for Mercedes 220 / 211 / 230 series
heavy duty type
185 mm compression spindle with 24 mm hex drive
2 compression heads 40 mm and 54 mm
3 pressure pads 22 mm, 33 mm and 57 mm
Alltoolsdirect.com | Hudson Distribution Limited | All Rights Reserved © 2022 | Development by Kola Digital
FREE SHIPPING IN ANY ORDER OVER €50 ! (including pallet items)