Additional information
Weight | 1 kg |
---|
From our Customers according to Google Reviews “Always great to deal”
Heavy-duty ball joint splitter suitable for commercial vehicles
Designed to be operated manually or by 12 Ton hydraulic ram supplied. Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram
€139.00 Exc. VAT €113.01
In StockWeight | 1 kg |
---|
20pc Air Accessory Kit
List of accessories included below
Allows disassembly and assembly of the wheel hub and the wheel bearings
Includes:
– pressure plates with diameters of :
50 – 55 – 59 – 63.3 – 66.6 – 70.3 – 71.5 – 73.1 – 73.4 – 74.8 – 77.5 – 81.5 – 83.4 mm
– sleeves with following diameters: 76 – 86 – 91 – 102 mm
– 3 extractor bolts M12 x 1.5
– 3 extractor bolts M14 x 1.5
– spindle 7/8 “x 300 mm (including thrust bearing)
– pressure nut 32 x 60 mm
– pressure sleeve 38 x 40 mm
– washer 40 x 3 mm
These pliers are designed to fit the Oetiker CV Drive Shaft boot Securing clips. They have a plate that presses a flat on the top of the clip so that it forms the spring loop correctly.
The Handles have 1/2 Sq section holes in the handle shafts to enable a torque Wrench to be used with the tool when required.
Drop forged CR-V steel jaws& leaded screws(370mm)both heat treated ensure you obtain professional job performance.
The tool is designed for use in limited space under wheel arch.
Jaws design is fitting to wrap coil claws for safely.
Maximum jaw opening is 370mm.
23mm applicable: AUDI, BMW, Citroen, Ford, Mercedes, Opel, VW, VOLVO 28mm applicable: Audi (A4, A6, A8), VW (Passat), Mercedes (W203) 34mm applicable: VW (from 98), Mercedes
Remove/install rear sub-frame bushes on Ford Focus.
Can be used in situ – no need to remove sub-frame from vehicle.
Application: Ford; Focus MK1 1998-2004.
Alltoolsdirect.com | Hudson Distribution Limited | All Rights Reserved © 2022 | Development by Kola Digital
FREE SHIPPING IN ANY ORDER OVER €50 ! (including pallet items)