Air Powered C/v Boot Installation Kit ct2613

Code: ct2613

CV Boot Installation Tool – Pneumatic

Air Powered Boot Installation Tool for CV Joints
Professional tool for commercial or occasional use.
Used for stretching of flexible rubber CV boots on automatic drive shaft assemblies
When a CV boot or gaiter is split instead of dismantling the front axle and drive shaft assembly simply use this tool for accurate and time saving labour.
The diameter of CV joints should be in the range of 20mm 110mm.
Installs flexible steering and CV boots without removing axle from the vehicle or the CV joint from the axle
Composite body with simple control valve.
Suitable for cars / small vans and light commercial vehicles.
Works from a 1/4in. BSP inlet attached to the rear end of the tool.

€144.00 Exc. VAT €117.07

In stock

In stock

OR

Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

You may also like…

Related products

  • Suspension & Drivetrain Tools

    CV CLAMP TOOL & CV JOINT BOOT CLAMP PLIERS SET

    Fast & simple tensioning and securing of CV boot banding strap
    Features integral band cutter
    Use with any banding up to 10mm in width
    Crimps and flattens clamps on ear type
    CV joint boot clamps

    (0 reviews)
    €20.00 Exc. VAT €16.26 Add to cart
  • Suspension & Drivetrain Tools

    Drive Shaft Puller Set Pd 7pc

    Allows disassembly and assembly of the wheel hub and the wheel bearings
    Includes:
    – pressure plates with diameters of :
    50 – 55 – 59 – 63.3 – 66.6 – 70.3 – 71.5 – 73.1 – 73.4 – 74.8 – 77.5 – 81.5 – 83.4 mm
    – sleeves with following diameters: 76 – 86 – 91 – 102 mm
    – 3 extractor bolts M12 x 1.5
    – 3 extractor bolts M14 x 1.5
    – spindle 7/8 “x 300 mm (including thrust bearing)
    – pressure nut 32 x 60 mm
    – pressure sleeve 38 x 40 mm
    – washer 40 x 3 mm

    (0 reviews)
    €89.00 Exc. VAT €72.36 Add to cart
  • Suspension & Drivetrain Tools

    5pc Front-end Service Set

    Allows Easy Removal Of Most Popular Types Of Pitman Arms, Tie Rods And Ball Joints.
    Press Type Ball Joint Separator Allows For Ball Joint Removal Without Damage To Boots And Other Parts
    Set Includes:
    Pitman Arm/Tie Rod End Puller
    Ball Joint Separator
    Fitman Am Puller
    Ball Joint/Tie Rod End Remover
    Tie Rod/Inner Bearing Race Puller
    (EURO type)
    Front End Service
    1. KA-7180
    2. KA-1405
    3. KA-3092 (L)
    4. KA-6867
    5. KA-7176 (DROP FORGED)

    (0 reviews)
    €92.25 Exc. VAT €75.00 Add to cart
  • Suspension & Drivetrain Tools

    3PC BALL JOINT SEPARATOR SET

    23mm applicable: AUDI, BMW, Citroen, Ford, Mercedes, Opel, VW, VOLVO 28mm applicable: Audi (A4, A6, A8), VW (Passat), Mercedes (W203) 34mm applicable: VW (from 98), Mercedes

    (0 reviews)
    €63.51 Exc. VAT €51.63 Add to cart