Timing Tools
Showing 1–12 of 113 results
-
Alfa Romeo (4)
-
Audi (20)
-
BMW (21)
-
Chrysler (1)
-
Citroen (10)
-
Fiat (8)
-
Ford (19)
-
Honda (1)
-
Land Rover (7)
-
Mercedes Benz (7)
-
Nissan (1)
-
OPEL / Vauxhall (9)
-
Peugeot (1)
-
Porsche (1)
-
Renault (5)
-
Seat (2)
-
Skoda (2)
-
Volkswagen (17)
-
Volvo (4)
-
Mercedes Benz
Mercedes Chain Driven Petrol Engine 1.6 & 2.0 Camshaft Locking Timing Tool Kit (Copy)
Specifically designed for vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engine.
Supplied with small and large diameter clamp pieces to ensure the camshaft is correctly held in place.
Supplied with special security bit socket for the camshaft pulleys.
Designed to allow removal and assembly of the camshafts.
Application: Mercedes-Benz M133, M270, M274,. These engines are found in the late A Class, B Class CLA, C Class and E Class vehicles.
Contents:
Camshaft Clamping Assembly (Chain End), OEM 270 589 00 61 00
Camshaft Clamping Assembly (Gearbox End)+Fixing Bolts, OEM 270 589 00 61 00
Security Bit Socket
Small Diameter Camshaft Blocks, OEM 270 589 00 61 00
Camshaft Clamping Assembly (TDC position), OEM 270 589 01 61 00(0 reviews)€269.84 Exc. VAT €219.38 Add to cart -
BMW
Engine Timing Tool Set For Bmw S65
Designed to fix the S65 Engine at the Top Dead Center Point to maintain the engine.
Used on following models with S65 engines: BMW M3 E90 / E92 / E93 (2007-2013).
Engine codes: S65 B40A (4.0L).
Contents:
Camshaft Alignment Tools, OEM 11 9 970 ( inlet OEM 11 9 971 + exhaust OEM 11 9 972).
Crankshaft Locking Tool, OEM 11 5 320.
Chain Tensioner Guide Locking Tool,OEM 11 5 290 (11 5 291 + 11 5 292).
Split Camshaft Gear Setting Tools, OEM 11 5 370.
6 mounting screws for camshaft adjusting tools.
Caution: always use an appropriate pulley holding tool to loosen and tighten the engine vibration damper against.(0 reviews)€112.49 Exc. VAT €91.46 Add to cart -
Porsche
Engine Timing Tool Set For Porsche 911 (996, 997)
Contents:
1 camshaft holding tool, for engine M96/03, OEM 9685
1 camshaft locking tool, for engines M97/01 & M96/03, OEM 9686
2 locking pins, for engines M97/01 & M96/03, OEM 9595/9595/1, OEM1 9685(0 reviews)€41.84 Exc. VAT €34.02 Add to cart -
Citroen
Balance Shaft Adjusting Tool Set For Land Rover, Citroen, Mitsubishi, Peugeot, Ford
For adjusting the balancer shaft
Suitable for following vehicles:
Land Rover Discovery, Discovery Sport, Freelander 2, eD4, TD4, TD4e (2009-2015)
engine codes: 224DT, DW12CTED4/224DT, DW12BTED4/224DT
Citroen C5, C5 II, C5 III, C6, C8, C-Crosse HDi (2000-2015)
engine codes: 4HX (DW12CTED4), 4HP (DW12BTED4), 4HX (DW12TED4), 4HW (DW12TED4/L4)
Mitsubishi Outlander DI-D, DI-DC (2007-2013)
engine codes: 4HK, 4HN
Peugeot 4007, 407, 607, 807, 406, 508, 607, HDi, GT Hdi (2000-2015)
engine codes: DW12MTED4 (4HK), DW12MTED4 (4HN), DW12BTED4 (4HP), DW12BTED4 (4HR), DW12BTED4 (4HT), DW12TED4/L4 (4HW), DW12BTED4 (4HS), DW12ATED (4HZ), DW12ATED4 (4HX), DW12ATED (4HZ), DW12CTED4 (4HL)
Ford Galaxy, Mondeo, S-Max, TDCI, TCI (2008-2015)
engine codes: KNBB, KNBA, KNWA, Q4BA32(0 reviews)€32.00 Exc. VAT €26.02 Add to cart -
Volvo
Engine Timing Tools For Volvo 3.0 3.2 T6 And Also Freelander 2 3.2 I6
Engine Timing Tools for Volvo 3.0 3.2 T6 And Also Freelander 2 3.2 I6
(0 reviews)€179.84 Exc. VAT €146.21 Add to cart -
Renault
Engine Timing Tool Set Renault
Suitable for both petrol and diesel engines
This kit enables the correct engine timing to be performed on Renault engines when changing the timing belt
The camshaft pulley setting tool holds two pulleys in place whilst changing the cam belt
Bolted to the centre of the cams using the existing bolts
For use on Clio, Laguna, Megane 1.4/1.5 16V
Kit includes:
Crankshaft locking pin, 5mm TDC timing pin,
Camshaft setting tool, Camshaft pulley setting tool
Applications: Clio, Laguna, Megane 1.4/1.6 16V, K4J, K4M & F4P, F4R engines(0 reviews)€50.84 Exc. VAT €41.33 Add to cart -
OPEL / Vauxhall
Timing Tool Set For Opel / Vauxhall, Chevrolet 2.0 Cdi
Suitable for 2.0 liter common rail Diesel engines
to set the engine timing, timing belt changing and other engine repairs
includes important tools for positioning and locking of the crankshaft and camshaft timing belt on and engine repair
Suitable for 2.0 liter common rail Diesel engines from Opel and Chevrolet
for the Opel engine code Z20DM and Z20DMH and Chevrolet engine code LLWZ20DMH, RA 420 , Z20SI, Z 20S3 , Z 20S4 and Z 20S5
a cam lock to use as OEM EN -48245
a crankshaft locking mechanism to be used, such as OEM EN -48246
four screws M6 x 20 mm(0 reviews)€22.49 Exc. VAT €18.28 Add to cart -
Renault
Diesel Engines Locking Tools Set For Opel Renault Nissan 1.5/1.9/2.2/2.5 Dci(vans)
For checking and adjusting the engine timing on following models:
Renault: Clio 1-2-3-4, Clio Sport 1-2-3, Mégane 1-2-3, Master 1-2, Mégane Scénic 1-2-3, Vel Satis 1-2, Avantime, Kangoo 1-2-3, Laguna 1-2-3, Espace 1-2-3, Trafic 1-2, Wind, Modus, Twingo, Koleos
Dacia: Logan, Duster, Sandero, Dokker
Nissan: Note, Qashqai, Micra, Interstar, Primastar, Kubistar, Almera, Primera
Opel: Vivaro, Movano
Volvo: S 40, V 40(0 reviews)€224.98 Exc. VAT €182.91 Add to cart -
Volkswagen
Petrol Engine Setting/locking Kit – Vag 1.2/1.4 Tsi – Belt Drive
CT4424
Timing Tool Set – VAG TSI
Engine Timing Tools for VAG 1.2 / 1.4 TSi
Essential tools for camshaft locking crankshaft replacement and timing belt replacement on VAG belt drive petrol engines including the 1.4 TSi ACT.Applicable to :
Audi A1 / 12-15
Audi A1 Sport back / 12-15
Audi A3 / 13-15
Audi A3 Sport back / 12-15
Seat lbiza / 12-15
Seat Leon / 12-15
Seat Toledo / 12-15
Scoda Fabia / 10-13
Scoda Octavia II / 10-13
Scoda Octavia III / 10-15Engine Codes:
1.2 TSi : CJZA(0 reviews)€101.84 Exc. VAT €82.80 Add to cart -
Volkswagen
Timing Tool Audi VW VAG 1.8L-2.0L TSI TFSI EA888 06-13 Skoda Seat 4103
Makes & models:
Audi
– TT MK2 (8J)
– A3 (8P)
– A3 Cabriolet
– A4 (B7)
– A4 (B8)
– A5
– Q3
– Q5Seat
– Leon MK2 1P
– Leon FR
– Exeo
– Altea XLSkoda
– Yeti
– Octavia MK2 (1Z, Ming Rui
– Superb MK2 (3T)Volkswagen
– Jetta MK5
– Jetta MK6
– Sagitar (China)
– Passat (B6)
– Passat CC
– SciroccoEngines:
– 1.8 R4 16v TSI/ TFSI (2006-2013) – EA888
– 2.0 R4 16v TSI/ TFSI (2006-2013) – EA888
– VAG in TSI series, TFSI (EA888) engines 1.8L and 2.0LEngine code:
– BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB
OEM:
– T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40265, T40267, T40271
(0 reviews)€59.00 Exc. VAT €47.97 Add to cart -
Mercedes Benz
Mercedes Timing Tool Set Chain Drive Petrol Engine M112, M113 2.4, 2.6
Makes & models:
Mercedes Benz
– M112/ M113
– C-Class 240/280 (202) (1998-), C-Class 240/320 (203) (2000-)
– CL500 (215) (1999-2007)
– CLK 320/430 (208) (1997-2003), CLK 240/320/500/55 AMG (209) (1997-)
– CLS 500/55 AMG (219)(2005-)
– E-Class 240/320/500/55 AMG (209)(1997-), E-Class 240/280/320/430 (210)(1997-), E-Class 240/320/350/430/500 (220) (1998-)
– SL 280/320/500 (129) (1998-2002), SL350/500/55 AMG (230) (2002-)
– SLK 320K (170)(2000-2004),SLK 55 AMG (171)(2004-)
– R-Class 500 (2005-)
– Viano 3.0/3.2/3.5 (2003-)
– Vito (639) (2003-)Engines:
– 2.4- 112.910/911
– 2.6- 112.912/913/914/915/916/917
– 2.8- 112.920/921/922/923
– 3.2- 112.940/941/942/943/944/947/949/951/953/954/955
– 3.7- 112.970/972/973/975/976
– 4.3- 113.940/941/942/943/948
– 5.0- 113.960/961/963/964/965/966/967/968/969/971
– 5.4- 113.981/987/989/990/992/995(0 reviews)€39.00 Exc. VAT €31.71 Add to cart -
BMW
Locking Tool Set Mini Cooper
Locking Tool Set Mini Cooper
Enables to fix the correct timing positions on the camshaft and crankshaft to replace the timing belt or chain on petrol engines.
Included: Camshaft Sprocket Holding Tool, Engine Support Bracket, Tensioner Assembly Tool. Application: BMW Mini: ONE (01-06) | Mini Cooper (01-06), Mini Copper S (02-06),Cooper S JC, Cooper S JCW (series R50-52-53-55-56-57). Engines type: W10B16AA, W10B16BA, W11B16AA(0 reviews)€184.00 Exc. VAT €149.59 Add to cart