Press & Pull Tools
Showing 1–12 of 26 results
-
Press & Pull Tools3 Jaw Gear Puller 8inch
3 Jaw Gear Puller 8inch
(0 reviews)€47.59 Exc. VAT €38.69 Add to cart -
Press & Pull Tools10 TON HYDRAULIC PULLER KIT
Description
• Forged steel 2-way yoke allows twin or triple leg pulls.
• 10tonne Hydraulic power unit with tommy bar.
• Suitable for pulling hubs, flanges, gears and bearings.
• Three 3-position puller arms and three sets of extension plates, supplied in carry-case.
• Hydraulic ram interchangeable with others in series.Specifications
Model No esl2009 PS981 Size: esl2009 Spread / Reach: 100mm: esl2009 50-100mm / 0-100mm 150mm: esl2009 75-150mm / 0-150mm 200mm: esl2009 100-200mm / 0-200mm 250mm: esl2009 150-250mm / 0-250mm Puller Type: esl2009 2 Legged Size: esl2009 Spread / Reach: 100mm: esl2009 50-100mm / 0-100mm 150mm: esl2009 75-150mm / 0-150mm 200mm: esl2009 100-200mm / 0-200mm 250mm: esl2009 150-250mm / 0-250mm Puller Type: esl2009 3 Legged Nett Weight: esl2009 4.74Kg (0 reviews)€159.00 Exc. VAT €129.27 Add to cart -
Press & Pull Tools12 Ton 10 Hole Hydraulic Hub Puller
12 Ton 10 Hole Hydraulic Hub Puller
(0 reviews)€120.00 Exc. VAT €97.56 Add to cart -
Press & Pull ToolsHydraulic Press Support Block
UNIVERSAL PRESS SUPPORT
Through the height adjustable bolts a fixture and vibration safe 3 level points construction is created.
The amount and arrangement at thread enable the conformity to almost every component surface.
Includes lateral safety device.(0 reviews)€139.00 Exc. VAT €113.01 Add to cart -
Press & Pull Tools
Blind Hole Bearing Puller Set
ct3245
shaft: slide hammer shaft 390mm/L
hammer WG.100mml/L-2.15LB(940g)
8mm 5/16” to 13/32”(8-10mm)
10mm 13/32” to 15/32”(10-12mm)
12mm 15/32” to 9/16”(12-14mm)
15mm 19/32” to 11/16”(15-17mm)
17mm 11/16” to 25/32” (17-20mm)
20mm 25/32” to 15/16” (20-24mm)25mm 1” to 1-1/8” (25-29mm)
30mm 1-3/16” to 1-1/4” (30-32mm)s-b5sh
Blind Hole Inner Bearing Puller Slide Hammer
Designed to Pull out inner bearings without damaging any of the surrounding parts. Very easy to use, just slide in one of the for Adapters which will fit best and open up the clamps by turning the handle clockwise – connect the slide hammer to the adapter an start to pull out the bearing by sliding the weight backwards, Set includes: Slide Hammer – total length 375 mm, weight 1.44 kg, Sliding weight 915 gram 4x different Adapter (collets): 10 – 14 mm, 15-19 mm, 18-25 mm and 25 – 32 m capacity(0 reviews)€59.00 Exc. VAT €47.97 Add to cart -
Press & Pull ToolsPropshaft Separator
new model
for separating propshafts
fits for most car models (except for Seat)(0 reviews)€34.00 Exc. VAT €27.64 Add to cart -
Press & Pull Tools6pcs Wiper Arm Puller Set
Spindle end with brass cap to prevent damage to the windscreen wiper arm
Suitable for many automobiles and commercial vehicles.(0 reviews)€69.00 Exc. VAT €56.10 Add to cart -
Press & Pull Tools3-arm Universal Puller Set
The puller legs are made in different sizes for narrow spaces.
With pulling legs for narrow spaces in different lengths.
Particularly well suited to be hung up on workshop walls.
All required clamping depths available at any time.
2-leg sliding bar
3-leg sliding bar
arms 100 mm (3 pcs.)
arms 200 mm (3 pcs.)
arms 250 mm (3 pcs.)
fine threat spindle 160 mm
fine threat spindle 270 mm(0 reviews)€129.00 Exc. VAT €104.88 Add to cart -
Press & Pull ToolsSlide Hammer & Puller
Product Description:
16pc Professional Slide Hammer / Puller Set
Combination Puller with 5lb Malleable Steel Slide Hammer
Drop Forged Steel Pullers and Attachments
Fully Hardened Shaft and Accessories
Converts in to a 2 or 3 Jaw Internal / External Puller(0 reviews)€79.31 Exc. VAT €64.48 Add to cart -
Press & Pull ToolsChrome Vanadium Mini Bearing Separator Set 9pcs
Compact set containing bearing separator, yoke and extensions.
Chrome Vanadium components ensure long life.
Also suitable for removing small gears, wheels and fittings from shafts.
Contents: Separator Ø15-58mm, 2 x Jaw 50mm, Thrust Screw, 2 x Extension Rod 45mm, 2 x Extension 30mm, Cross Beam(0 reviews)€40.00 Exc. VAT €32.52 Add to cart -
Press & Pull ToolsPower Steer Pump Pulley Kit
Works on Ford, GM, and Chrysler vehicles with Saginaw, Thompson and Ford C111 and C2 power steering pumps.
Fits 1 1/8″, 1 1/4″, 1 5/16″, and 1 3/8″ pulley hub diameters including 1988 and newer GM cars equipped with Quad 4 engines; 1991 and newer GM minivans with 3.1 L and 3800 V-6 engines; 1991 to current Ford 4.6L engines with a metric shaft.
Also includes No 7931 spacer for work on Chrysler Cirrus, Dodge Stratus and Plymouth Breeze(0 reviews)€24.10 Exc. VAT €19.59 Add to cart -
Press & Pull ToolsBush / Bearing / Seal Driver Master Set 51pcs
Bush / Bearing / Seal Driver Master Set 51pcs
(0 reviews)€132.98 Exc. VAT €108.11 Add to cart
